1. 率先删除redhat原有的yum

  1.  

    rpm -aq | grep yum | xargs rpm -e
    –nodeps

  2.  

    rpm -aq | grep python-iniparse | xargs rpm
    -e –nodeps

    查看是不是早已卸载完结:

  1. YUM源更新的主意,5转换地点YUM源。 

    rpm -aq | grep yum

  2.  

    rpm -aq | grep
    python-iniparse

引言:由于RHEL的yum在线更新是收费的,假诺没有注册的话是不可以选择的,即不可能在线安装软件。在那种气象下,想选用RHEL系统,还想用yum源来在线安装软件,有没有艺术?答案是有艺术,请往下看!

鉴于Redhat的yum在线更新是收费的,假使没有注册的话是不可以采用的,即不能够在线安装软件。在那种情形下,想使用Redhat系统,还想用yum源来在线安装软件,有没有法子?

RHEL6.5更换地点YUM源

引言:由于RHEL的yum在线更新是收费的,如果没有挂号的话是不可能利用的,即不可以在线安装软件。在那种境况下,想行使RHEL系统,还想用yum源来在线安装软件,有没有主意?答案是有措施,请往下看!

1、删除RHEL原有的yum
            rpm -aq|grep yum|xargs rpm -e –nodeps  #删除
2、下载新的yum安装包  #这里我们采用CentOS的yum源
wget

wget

wget

wget

3、安装yum软件包

rpm -ivh  python-iniparse-0.3.1-2.1.el6.noarch.rpm
rpm -ivh  yum-metadata-parser-1.1.2-14.1.el6.i686.rpm
rpm -ivh  yum-3.2.27-14.el6.centos.noarch.rpm 
rpm -ivh yum-plugin-fastestmirror-1.1.26-11.el6.noarch.rpm
 
 
注意:倒数安装包要放在一起同时安装,否则会唤起互相依赖,安装败北。
4、更改yum源  #咱俩拔取腾讯网的CentOS镜像源
  cd /etc/yum.repos.d/
  wget 
  vi CentOS6-Base-163.repo  #编排文件
  把公文之中的$releasever全体替换为版本号,即6 最终保存!
仍然直接把下部的内存拷贝到CentOS6-Base-163.repo文件中即可(已经修改好)
# CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and
the
# update status of each mirror to pick mirrors that are updated to
and
# geographically close to the client.  You should use this for CentOS
updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try
the
# remarked out baseurl= line instead.
#
#

[base]
name=CentOS-6 – Base – 163.com
baseurl=
#mirrorlist=
gpgcheck=1
gpgkey=

#released updates
[updates]
name=CentOS-6 – Updates – 163.com
baseurl=
#mirrorlist=
gpgcheck=1
gpgkey=

#additional packages that may be useful
[extras]
name=CentOS-6 – Extras – 163.com
baseurl=
#mirrorlist=
gpgcheck=1
gpgkey=

#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-6 – Plus – 163.com
baseurl=
#mirrorlist=
gpgcheck=1
enabled=0
gpgkey=

#contrib – packages by Centos Users
[contrib]
name=CentOS-6 – Contrib – 163.com
baseurl=
#mirrorlist=
gpgcheck=1
enabled=0
gpgkey= clean
all    #清理yum缓存
            yum makecache   
#将服务器上的软件包音讯缓存到地头,以拉长搜索安装软件的进程
            yum install vim*澳门金沙国际 ,  #测试yum是不是可用
 
时至前日,RedHat6可以选拔CentOS的yum源在线安装软件了!

RedHat 6.2 Linux修改yum源免费使用CentOS源

配置EPEL YUM源

Redhat 本地yum源配置

yum的布局文件表明

RedHat 6.1下安装yum(图文)

YUM 安装及清理

CentOS 6.4上搭建yum本地源

引言:由于RHEL的yum在线更新是收费的,若是没有挂号的话是不能利用的,即不可以在线安装软件。在那种场所下,想利用…

2. 下载yum安装包

  1.  wget

  2.  wget

  3.  wget

  4.  wget

  5. wget

1、删除RHEL原有的yum
            rpm -aq|grep yum|xargs rpm -e –nodeps  #删除

  答案是有办法,请往下看!

先安装python,在安装yum-metadata 最后五个yum一起安装。

2、下载新的yum安装包  #此处大家采纳CentOS的yum源

1、删除redhat原有的yum源

3. 设置下载的rpm包

rpm -ivh python-iniparse-0.4-9.el7.noarch.rpm yum-metadata-parser-1.1.4-10.el7.x86_64.rpm yum-3.4.3-154.el7.centos.noarch.rpm yum-plugin-fastestmirror-1.1.31-42.el7.noarch.rpm

  
wget 
       
 wget 
        
wget 
       
 wget 

# rpm -aq | grep yum|xargs rpm -e –nodeps

4. 创设文件/etc/yum.repos.d/CentOS-Base.repo

可以应用新浪云或阿里云镜像站点:

博客园云镜像:

[base]
name=CentOS-$releasever - Base
baseurl=http://mirrors.163.com/centos/7.4.1708/os/$basearch/
gpgcheck=1
gpgkey=http://mirrors.163.com/centos/7.4.1708/os/x86_64/RPM-GPG-KEY-CentOS-7

#released updates
[updates]
name=CentOS-$releasever - Updates
baseurl=http://mirrors.163.com/centos/7.4.1708/updates/$basearch/
gpgcheck=1
gpgkey=http://mirrors.163.com/centos/7.4.1708/os/x86_64/RPM-GPG-KEY-CentOS-7

[extras]
name=CentOS-$releasever - Extras
baseurl=http://mirrors.163.com/centos/7.4.1708/extras//$basearch/
gpgcheck=1
gpgkey=http://mirrors.163.com/centos/7.4.1708/os/x86_64/RPM-GPG-KEY-CentOS-7

[centosplus]
name=CentOS-$releasever - Plus
baseurl=http://mirrors.163.com/centos/7.4.1708/centosplus//$basearch/
gpgcheck=1
enabled=0

阿里云镜像:

[base]
name=CentOS-$releasever - Base
baseurl=https://mirrors.aliyun.com/centos/7.4.1708/os/$basearch/
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/centos/7.4.1708/os/x86_64/RPM-GPG-KEY-CentOS-7

#released updates
[updates]
name=CentOS-$releasever - Updates
baseurl=https://mirrors.aliyun.com/centos/7.4.1708/updates/$basearch/
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/centos/7.4.1708/os/x86_64/RPM-GPG-KEY-CentOS-7

[extras]
name=CentOS-$releasever - Extras
baseurl=https://mirrors.aliyun.com/centos/7.4.1708/extras//$basearch/
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/centos/7.4.1708/os/x86_64/RPM-GPG-KEY-CentOS-7

[centosplus]
name=CentOS-$releasever - Plus
baseurl=https://mirrors.aliyun.com/centos/7.4.1708/centosplus//$basearch/
gpgcheck=1
enabled=0

 

3、安装yum软件包

2、下载新的yum安装包 

5. yum clean all

   rpm -ivh  python-iniparse-0.3.1-2.1.el6.noarch.rpm
         rpm -ivh  yum-metadata-parser-1.1.2-14.1.el6.i686.rpm
         rpm -ivh  yum-3.2.27-14.el6.centos.noarch.rpm 
yum-plugin-fastestmirror-1.1.26-11.el6.noarch.rpm
  
   注意:最后七个安装包要放在一块儿还要设置,否则会唤醒互相看重,安装战败。

  那里大家拔取CentOS的yum源

6. yum makecache(生花费地缓存)

4、更改yum源  #咱俩接纳天涯论坛的CentOS镜像源
   cd /etc/yum.repos.d/
   wget 
   vi CentOS6-Base-163.repo  #编排文件
   把公文之中的$releasever全体替换为版本号,即6 最终保存!

# wget

附:yum源变更注脚

经查从去年07月24日起阿里云和博客园云镜像站点中对此CentOS
7.4.1708本子的yum源已经不做支撑,在镜像站点中附带了一个readme文件注脚如下:

澳门金沙国际 1

焚薮而田该站点镜像不能运用的章程有如下两种:

方法一:将上述第4点中所有的7.4.1708轮换为7

方法二:将上述第4点中所有的mirrors.163.com或mirrors.aliyun.com替换为vault.centos.org

 

yum update出现:

澳门金沙国际 2

 

抑或直接把下边的内存拷贝到CentOS6-Base-163.repo文件中即可(已经修改好)

# wget

1 # CentOS-Base.repo
2 #
3 # The mirror system uses the connecting IP address of the client and
the
4 # update status of each mirror to pick mirrors that are updated to
and
5 # geographically close to the client. You should use this for CentOS
updates
6 # unless you are manually picking other mirrors.
7 #
8 # If the mirrorlist= does not work for you, as a fall back you can
try the
9 # remarked out baseurl= line instead.
10 #
11 #
12
13 [base]
14 name=CentOS-6 – Base – 163.com
15 baseurl=
16
#mirrorlist=
17 gpgcheck=1
18 gpgkey=
19
20 #released updates
21 [updates]
22 name=CentOS-6 – Updates – 163.com
23 baseurl=
24
#mirrorlist=
25 gpgcheck=1
26 gpgkey=
27
28 #additional packages that may be useful
29 [extras]
30 name=CentOS-6 – Extras – 163.com
31 baseurl=
32
#mirrorlist=
33 gpgcheck=1
34 gpgkey=
35
36 #additional packages that extend functionality of existing
packages
37 [centosplus]
38 name=CentOS-6 – Plus – 163.com
39 baseurl=
40
#mirrorlist=
41 gpgcheck=1
42 enabled=0
43 gpgkey=
44
45 #contrib – packages by Centos Users
46 [contrib]
47 name=CentOS-6 – Contrib – 163.com
48 baseurl=
49
#mirrorlist=
50 gpgcheck=1
51 enabled=0
52 gpgkey=

# wget

5、yum clean all     #清理yum缓存
            yum makecache    
#将服务器上的软件包音信缓存到当地,以升高搜索安装软件的速度
            yum install vim*  #测试yum是不是可用
 
由来,Redhat6可以行使CentOS的yum源在线安装软件了!

# wget

转载自:

3、安装yum软件包

# rpm -ivh  python-iniparse-0.3.1-2.1.el6.noarch.rpm

# rpm -ivh  yum-metadata-parser-1.1.2-14.1.el6.i686.rpm

# rpm -ivh  yum-3.2.27-14.el6.centos.noarch.rpm 
yum-plugin-fastestmirror-1.1.26-11.el6.noarch.rpm

  注意:最终八个安装包要放在一块儿同时安装,否则会唤起互相体贴,安装战败。

4、更改yum源  #大家采取腾讯网的CentOS镜像源

# cd /etc/yum.repos.d/

# wget 

# vi CentOS6-Base-163.repo

  编辑文件,把文件之中的$releasever全体替换为版本号,即6 最终保存!或者直接把下部的内存拷贝到CentOS6-Base-163.repo文件中即可(已经修改好)

#########################################################################

# CentOS-Base.repo

#

# The mirror system uses the connecting IP address of the client and
the

# update status of each mirror to pick mirrors that are updated to and

# geographically close to the client.  You should use this for CentOS
updates

# unless you are manually picking other mirrors.

#

# If the mirrorlist= does not work for you, as a fall back you can try
the

# remarked out baseurl= line instead.

#

#

[base]

name=CentOS-6 – Base – 163.com

baseurl=

#mirrorlist=

gpgcheck=1

gpgkey=

#released updates

[updates]

name=CentOS-6 – Updates – 163.com

baseurl=

#mirrorlist=

gpgcheck=1

gpgkey=

#additional packages that may be useful

[extras]

name=CentOS-6 – Extras – 163.com

baseurl=

#mirrorlist=

gpgcheck=1

gpgkey=

#additional packages that extend functionality of existing packages

[centosplus]

name=CentOS-6 – Plus – 163.com

baseurl=

#mirrorlist=

gpgcheck=1

enabled=0

gpgkey=

#contrib – packages by Centos Users

[contrib]

name=CentOS-6 – Contrib – 163.com

baseurl=

#mirrorlist=

gpgcheck=1

enabled=0

gpgkey=

#########################################################################

5、清理yum缓存

# yum clean all

# yum makecache    
#将服务器上的软件包新闻缓存到地头,以增长搜索安装软件的快慢

# yum install vim*    #测试域名是还是不是可用

  至此,Redhat6可以采取CentOS的yum源在线安装软件了!

相关文章