在61人的Red
Hat Enterprise Linux Server release 陆.陆上安装Symantec Backup Exec
20十时, 碰着上面错误:

Symantec Backup Exec 2010 Agent For Linux安装,backupexec

原先写过一篇小说介绍过Symantec Backup Exec 二零一三 Agent For
Linux安装安装,后天牵线一下Symantec Backup Exec 2010 Agent For
Linux安装,关于赛门铁克的Backup
Exec的效率请看上边重要效率和要害优势介绍。有趣味的能够参考官网介绍:
今后新型的本子是Symantec Backup Exec 201四.

一言九鼎作用

选用单个消除方案保养虚拟和大体环境。

因此与 Microsoft® Volume Shadow Copy Service (VSS) 和 VMware 的 vStorage
APIs for Data Protection (VADP)
深度集成,可赶快得到虚拟机快速照相,从而最大限度收缩对虚拟主机上 CPU、内部存款和储蓄器和
I/O 负载的属性影响。

备份至磁盘、磁带和云。

神速、高效的通用恢复生机成效可在数秒内轻松还原虚拟机、服务器、应用程序、数据库、文件/文件夹或粒度对象。

购并了裸机、物理到虚拟 (P2V) 和编造到物理 (V2P) 的回复功效。

可在总体虚拟和/或物理环境中对数据开展灵活的块级重复数据删除。

可眼看自动识别和维护出现的新虚拟机,因而你能确信自身的虚拟机始终获得周到保证。

不难使用的界面设有智能管理面板和直观的初始,为您提供监察和控制功效,方便你依据必要神速跟踪、监察和控制和治本各类备份与回复作业。

活动验证每2个虚拟机备份的可复苏性。

 

重在优势

选用单个统一的可伸缩消除方案,既可爱慕虚拟和大体环境,还可去除那3个会追加管理时间、备份作业、复制数据、存款和储蓄和开销等的连带消除方案。

可实现长足可相信备份,速度相比较在此以前版本大约进步了壹倍*,包罗开展 VMware 和
Hyper-V 虚拟机备份以及接纳 Backup Exec 重复数据删除技术的备份。

可在别的时刻非常快上涨您供给的故事情节,从而显明收缩停机时间和数目损失。

可直接从存款和储蓄高效还原数据,从而简化并加速关键时刻的还原操作。
无需再浪费宝贵的时日和磁盘空间来充实备份作业,也不要求鲜明里头景况或探寻一定数据。

可尊敬更加多多少,与此同时,可在应用购并的双重数据删除和归档技术存款和储蓄备份文件时最大限度收缩所需备份时段、网络通信和磁盘空间。

在履行可相信的1致性应用程序虚拟机备份时,可最大限度收缩对虚拟主机上
CPU、内部存款和储蓄器和 I/O 负载的习性影响。

可因而单个管控台管理整个备份环境,大大节省时间和基金,并压缩复杂性。

 

设置进程

率先要将Symantec Backup Exec 贰零零捌 Agent For
Linux的装置包RALUS_RMALS_RAMS-520四.4.tar.gz准备好,上传到Linux服务器,然后解压安装。

一:首先解压安装包。

 

[[email protected]
client]tar -zxvf  RALUS_RMALS_RAMS-5204.4.tar.gz
[[email protected]
client]# ls
installralus      messages                        ramsinst.conf      
uninstallrams
installralus.cmd  perl                            rmalinst.conf      
uninstallrams.pl
installralus.pl   pkgs                            scripts            
uninstallrmal
installrams       RALUS64                         tools              
uninstallrmal.pl
installrams.pl    ralusinst.conf                  uninstallralus     
VxIF
installrmal       RALUS_RMALS_RAMS-5204.4.tar.gz  uninstallralus.cmd
installrmal.pl    RALUSx86                        uninstallralus.pl

 

贰: 执行./installralus安装命令

贰.一 如下所示,首先会检查system配置是还是不是满足安装要求。

[[email protected] client]# ./installralus

 

 

 

   Symantec Backup Exec Remote Agent for Linux/Unix Servers 13.0.5204             

 

Enter the system names separated by spaces on which to install RALUS: (ceglnx01)

 

Checking system communication:

 

    Checking OS version on ceglnx01 ....................... Linux 2.6.32-200.13.1.el5uek

    Checking system support for ceglnx01 ... Linux 2.6.32-200.13.1.el5uek supported by RALUS

 

Initial system check completed successfully.

 

Press [Return] to continue: 

二.贰检查RALUS安装的供给是不是知足

Symantec Backup Exec Remote Agent for Linux/Unix Servers 13.0.5204             

 

hecking system installation requirements:

 

hecking RALUS installation requirements on Linux target systems: ceglnx01

 

hecking RALUS installation requirements on ceglnx01:

 

   Checking file system space ............................. required space is available

 

nstallation requirements checks completed successfully.

 

ress [Return] to continue: 

   Checking for prerequisites .................................................... Done

   Checking for Port 10000 ....................................................... Done

3:配置Symantec Backup Exec Server。包涵Backup Exec服务器的地方

Remote Agent Media Server Configuration                           

 

 display the Remote Agent as a selection in a media server's backup selection tree, and to be able to specify a local network for use between the Remote Agent and a media server, enter the names or IP addresses of the media servers that you want the Remote Agent on 'ceglnx01' to communicate with.

 

      An IP Address: XXX.XXX.XXX.XXX

      A Host Name: COMPUTERNAME

 

ter a directory host:192.168.xxx.xxx  

 you want to add another name or address for this agent? [y, n] (n)

 

 

 

四:检查beoper用户组是或不是留存。

 

                           Remote Agent Media Server Configuration                           

 

Hostnames and/or IP addresses verification for 'ceglnx01':

 

        Address: 192.168.xxx.xxx

 

Is this information correct? [y, n] (y)

 

 

 

 

To perform backups, you must have a 'beoper' user group. This user group can be created only if you are not using NIS server. Your system 'ceglnx01' will be scanned to detect a NIS server, group and membership.

 

 

Press [Return] to continue: 

    Checking if system uses NIS server: ............................................ No

 

The installer will now check your system for the 'beoper' user group and root membership.

 

 

Press [Return] to continue: 

    Checking for 'beoper' user group: ........................................ Not Found

    Checking for 'root' user membership in 'beoper' user group: .............. Not Found

 

You can create 'beoper' user group manually or you can choose to have it created automatically.

 

Do you want installer to create 'beoper' user group on 'ceglnx01'? [y, n] (y)

 

Do you want to use specific group ID when creating 'beoper' user group? [y, n] (n)

 

 

    Creating group 'beoper': ...................................................... Done

 

 

Do you want to add the 'root' user to 'beoper' user group? [y, n] (y)

 

 

    Adding 'root' user to 'beoper' user group: ................................... Done

 

 

Press [Return] to continue: 

 

 

五:安装组件、拷贝脚本。

Symantec Backup Exec Remote Agent for Linux/Unix Servers 13.0.5204             

 

talling Symantec Backup Exec Remote Agent for Linux/Unix Servers on ceglnx01:

 

 Installing VRTSralus 13.0.5204 on ceglnx01 ....................... done 1 of 1 steps

 

antec Backup Exec Remote Agent for Linux/Unix Servers installation completed successfully.

 

ss [Return] to continue: 

 Copying new initialization scripts ............................................ Done

 Updating RALUS files for beoper ............................................... Done

Symantec Backup Exec Remote Agent for Linux/Unix Servers 13.0.5204             

 

onfiguring Symantec Backup Exec Remote Agent for Linux/Unix Servers:

 

   Creating configuration files on ceglnx01 ...................................... Done

 

 

ou must establish a trust relationship between the media server and the Linux or UNIX computer. Add the remote computer to the User-defined Selections in the backup selections list on the media server. Expand the selection tree to ensure that the trust relationship is validated.

 

ymantec Backup Exec Remote Agent for Linux/Unix Servers configured successfully.

 

ress [Return] to continue: 

Symantec Backup Exec Remote Agent for Linux/Unix Servers 13.0.5204             

 

onfiguring Symantec Backup Exec Remote Agent for Linux/Unix Servers:

 

   Creating configuration files on ceglnx01 ...................................... Done

 

 

ou must establish a trust relationship between the media server and the Linux or UNIX computer. Add the remote computer to the User-defined Selections in the backup selections list on the media server. Expand the selection tree to ensure that the trust relationship is validated.

 

ymantec Backup Exec Remote Agent for Linux/Unix Servers configured successfully.

 

ress [Return] to continue: 

he response file is saved at:

 

   /var/tmp/vxif/installralus731152223/installralus731152223.response

 

he installralus log is saved at:

 

   /var/tmp/vxif/installralus731152223/installralus.log

 

初始关闭服务

 

[[email protected]
init.d]# /etc/init.d/VRTSralus.init start

Starting Symantec Backup Exec Remote Agent ……

Starting Symantec Backup Exec Remote Agent: [ OK ]

[[email protected]
backupsets]# /etc/init.d/VRTSralus.init stop

Stopping Symantec Backup Exec Remote Agent …

Stopping Symantec Backup Exec Remote Agent: [ OK ]

 

计划BE管理服务器

客户端安装成功后,此时固然能够在“Linux/Unix服务器”以及“用户定义采纳项”里面找到刚才的安装Symantec
Bakup Exec
Client的Linux服务器,但是此时总是那台Linux服务器,须要添加”登录凭据“,然后才能浏览、备份Linux服务器上数据文件。如下所示。

 

Symantec Backup Exec Agent For Linux防火墙难题,backupexec

     如若在Unix或Linux安装配备好了Symantec Backup Exec Agent For
Linux,不过在Symantec Backup Exec服务端无法访问Symantec Backup Exec
Agent,那么此时您首先应当检查Unix或Linux上的Symantec Backup Exec
Agent服务是不是运维。如下所示,能够确认Symantec Backup Exec
Agent服务已经运行。假诺未有运营,可以执行/etc/init.d/V福睿斯TSralus.init
start
命令运营服务。(注意:出于①些缘由,原服务器名称作者会用db-server替换)

[[email protected] ~]# lsof -i tcp:10000

COMMAND   PID USER   FD   TYPE DEVICE SIZE NODE NAME

beremote 3495 root    5u  IPv4  13184       TCP *:ndmp (LISTEN)

[[email protected] ~]# ps -ef | grep beremote

root      3495     1  0 Nov02 ?        00:00:09 /opt/VRTSralus/bin/beremote

root      5906  2573  0 12:02 pts/2    00:00:00 grep beremote

[[email protected] ~]# 

 

那么接下去,我们看看是不是足以经过端口一千0号telnet到Linux服务器,如下所示,连接失败(Connection
failed),那么大家得以肯定是Linux上的防火墙难点

假如你想确认一下,可以暂且关门防火墙服务测试一下(service iptables
stop)。

那么接下去须要布署防火墙,我们必要运用下边发号施令添加端口号10000

iptables -A INPUT -s <Media Server IP> -d <Unix Server IP>
-p tcp –dport 10000 -j ACCEPT

[[email protected] ~]# iptables -A INPUT -s 192.168.16.16  -d 192.168.16.3 -p tcp --dport 10000 -j ACCEPT

[[email protected] ~]# service iptables save

Saving firewall rules to /etc/sysconfig/iptables: [  OK  ]

[[email protected] ~]# service iptables restart

Flushing firewall rules: [  OK  ]

Setting chains to policy ACCEPT: filter [  OK  ]

Unloading iptables modules: [  OK  ]

Applying iptables firewall rules: [  OK  ]

Loading additional iptables modules: ip_conntrack_netbios_ns ip_conntrack_ftp [  OK  ]

[[email protected] ~]# 

结果接二连三行使telnet测试,发现难题依然留存,非凡嫌疑,检查iptables发现如下消息

[[email protected]
~]# more /etc/sysconfig/iptables
# Generated by iptables-save v1.3.5 on Tue Nov  4 12:14:53 2014
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [46679:7171562]
:RH-Firewall-1-INPUT – [0:0]
-A INPUT -j RH-Firewall-1-INPUT
-A INPUT -s 192.168.16.16 -d 192.168.16.3 -p tcp -m tcp –dport 10000 -j
ACCEPT
-A FORWARD -j RH-Firewall-1-INPUT
Linux防火墙难题,Linux技术文章目录。-A RH-Firewall-1-INPUT -i lo -j ACCEPT
-A RH-Firewall-1-INPUT -p icmp -m icmp –icmp-type any -j ACCEPT
-A RH-Firewall-1-INPUT -p esp -j ACCEPT
-A RH-Firewall-1-INPUT -p ah -j ACCEPT
-A RH-Firewall-1-INPUT -d 224.0.0.251 -p udp -m udp –dport 5353 -j
ACCEPT
-A RH-Firewall-1-INPUT -p udp -m udp –dport 631 -j ACCEPT
-A RH-Firewall-1-INPUT -p tcp -m tcp –dport 631 -j ACCEPT
-A RH-Firewall-1-INPUT -p tcp -m state –state NEW -m tcp –dport 8080
-j ACCEPT
-A RH-Firewall-1-INPUT -p tcp -m state –state NEW -m tcp –dport 8088
-j ACCEPT
-A RH-Firewall-1-INPUT -m state –state RELATED,ESTABLISHED -j ACCEPT
-A RH-Firewall-1-INPUT -p tcp -m state –state NEW -m tcp –dport 21 -j
ACCEPT
-A RH-Firewall-1-INPUT -p tcp -m state –state NEW -m tcp –dport 22 -j
ACCEPT
-A RH-Firewall-1-INPUT -p tcp -m tcp –dport 5901 -j ACCEPT
-A RH-Firewall-1-INPUT -p tcp -m tcp –dport 5902 -j ACCEPT
-A RH-Firewall-1-INPUT -p tcp -m state –state NEW -m tcp –dport 1521
-j ACCEPT
-A RH-Firewall-1-INPUT -j REJECT –reject-with icmp-host-prohibited
COMMIT
# Completed on Tue Nov  4 12:14:53 2014

该Linux服务器版本为Oracle Linux Server release
伍.7,需求修改上边石黄部分的安插,改为下边配置,然后重启iptables服务。难点一举成功。

 

[[email protected] ~]# service iptables restart

Flushing firewall rules: [  OK  ]

Setting chains to policy ACCEPT: filter [  OK  ]

Unloading iptables modules: [  OK  ]

Applying iptables firewall rules: [  OK  ]

Loading additional iptables modules: ip_conntrack_netbios_ns ip_conntrack_ftp [  OK  ]

 

参考资料:

   

 

symantec backup exec 怎备份Linux下的文书

本身的DFS是别的一台总括机,输入UNC路径能够查阅到,打开backup Exec
20拾怎么E0000F1陆貌似是be找不到备份介质,掉过电?be作者晓得的就这个了,你能够参见,wkSZgu
 

 

怎查看Symantec Backup exec agent是还是不是运营

在急需检查的服务器上执行以下动作即可:
1.点开始,点运行
2.输入Services.msc
3.检查Backup Exec Remote Agent For Windows Systems
四.比方前边展现已运营,则是正规运转,其余情况为运维退步。
 

#
./installralus

symantec backup exec 2010 r2 不可能连接到windows server 二零零六 remote agent

最佳把备份登陆帐号加入客户端本地管理员组中
 

Backup Exec 2010 Agent For
Linux安装,backupexec 此前写过1篇小说介绍过Symantec Backup Exec 二零一二Agent For Linux安装安装,后天介绍一下Symantec Backu…

Unix & Linux
方面包车型客车博客整理、归咎分类,要坚忍不拔的求学Unix
&Linux,加油!技术供给积累和沉淀.更亟待滴水穿石的神气、百折不挠的心志!借此下边名句勉励本身!

symantec backup exec 怎备份Linux下的公文

自家的DFS是其它1台微型总括机,输入UNC路径可以查看到,打开backup Exec
20十怎么E0000F1六相似是be找不到备份介质,掉过电?be笔者理解的就这一个了,你能够参见,wkSZgu
 

Backup Exec Agent For
Linux防火墙难题,backupexec 假设在Unix或Linux安装配备好了Symantec Backup
Exec Agent For Linux,可是在Symantec Backup Exec服务端无…

./installralus:
../perl/Linux/bin/perl: /lib/ld-linux.so.2: bad ELF interpreter: No such
file or directory

 

 

书上有路勤为径,学海无涯苦作舟!

出现那个错误是因为六十八个人系统中安装三拾肆人应用程序(Symantec
Backup Exec
20十的三12位安装应用程序,倘使是陆十个人应用程序,就不会碰着那个难点),须要在63个人系统中安装三16位相关包。安装下边包即可缓解这么些题目。

昆仑山不辞细土,故能成其高;大海不择细流,故能就其深。

 

波士顿不是一天建成的,胖子也不是一顿吃成的。

yum
install glibc.i686

 

 

Shell学习总结

澳门金沙国际, 

文件管理

在设置进度中,还遇到上面错误:

Linux命令学习计算:cd命令

 

Linux命令学习总括:
file命令

Enter the system names separated by spaces on which to install RALUS: (MyLNX8)

 

Checking system communication:

 

    Attempting /usr/bin/rsh with MyLNX8 ........................................................................... 

Cannot /usr/bin/rsh to MyLNX8

Initial system check failed.

 

Press [Return] to continue: 

Linux命令学习总计:pwd命令

 

Linux命令学习总结:rm命令

并发那些荒唐的缘故是因为计划文件/etc/hosts里面未有配置主机名,
在 /etc/sysconfig/network中主机名称叫MyLNX八

Linux命令学习总结:rmdir

 

Linux命令学习总括:cp命令

# more /etc/hosts

 

127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4

 

::1         localhost localhost.localdomain localhost6 localhost6.localdom

系统一管理理

 

Linux命令学习计算:last

修改配置文件/etc/hosts后,这些题目一蹴而就。

Linux命令学习总计:reboot命令

 

Linux命令学习计算:shutdown

# more /etc/hosts

 

127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4

 

::1         localhost localhost.localdomain localhost6 localhost6.localdomain6

 

192.168.xx.xxx   MyLNX8.xxx.xxx.com    MyLNX8

系统安装

Linux命令学习计算:date命令

Shell综合选取

归档—监察和控制ORACLE数据库告警日志

Linux
rm删除大量文书

shell脚本执行时报”bad interpreter:
Text file busy”的化解办法

C昂CoraLF line
terminators导致shell脚本报错:command not
found

Linux学习总结

Linux
FTP配置管理

Linux
字符集的配备

Linux
质量监测工具

Linux
NetHogs监察和控制工具介绍**

Linux
定时作业配置

Linux
Ignite配置

Linux磁盘管理配置

Linux
使用fdisk添加新分区

fdisk添加分区引起的Linux Error: 2二: Invalid
argument

Linux系统挂载NTFS移动硬盘

Linux系统挂载FAT32的U盘

Linux挂载卸载光盘&实践

Linux磁盘空间监察和控制告警

Linux
LVM学习总结——创立卷组VG

Linux
格式化扩张分区(Extended)

Linux
LVM学习总计——删除卷组VG

Linux
LVM学习总括——扩大卷组VG

Linux
LVM学习总结——放大LV体积

Linux
LVM学习计算——删除物理卷

Linux
硬盘分区生效命令partprobe

Vmware扩张磁盘怎么样不需重启系统

You cannot
change a partition into an extended one or vice versa Delete it
first

RedHat
4下无resize2fs命令

 

Linux组件安装卸载

 

JDK壹.叁安装出现/lib/ld-linux.so.二: bad ELF
interpreter: No such file or directory
Done.

Redhat
Linux安装JDK
1.7

Linux如何查看JDK的安装路径

Red Hat
Enterprise Server 6.0 安装Sendmail相关包

SYMBDSNAP_SDK[3943]: Failed to open device:
/dev/symbdsnapctl, errno:
2

Linux安装DBI/DBD-ORACLE

RedHat
Linux 奥迪Q7HEL陆配置本地YUM源

Linux make:
g++: Command not
found

SportageHEL 5.七Yum布置当地源[Errno 2] No such
file or
directory

 

       

Linux服务器管理珍惜

Linux查看系统硬件消息

VMware安装RedHat 陆(6贰拾一位)报错难题

Crontab定时职分安顿

Linux系统VNC配置实践总括

Linux
客户端访问
NFS报Permission Denied错误

Linux忘记root密码如何做?

Linux下解压超越肆G的zip文件

深切了解Linux修改hostname

Linux No
volume control GStreamer plugins and/or devices
found

Linux
sendmail发送邮件战败会诊案例

Linux查看系统开机时间

Linux系统查看系统是33个人如故陆二十位方式计算

Oracle
Linux 5.7安装VMware Tools的问题

编造机VMware与主机共享文件介绍

Linux查看设置系统时区

Linux服务器宕机案例一则

Linux
SendMail发送邮件失利会诊案例

GConf
error:Failed to contact configuration
server

翻看Linux版本消息

Red Hat
Enterprise Linux 陆.永州装体验

Linux
怎么样通过命令仅收获IP地址

Linux时间1起介绍

Linux下打开关闭SeLinux

Linux的NTP配置计算

Linux
SSH登录慢案例剖析

 

 

Linux文件管理配置

Linux怎么着寻找大文件或目录计算

 

Linux邮件管理配置

 

postfix与sendmail冲突

Linux
SendMail服务运维慢总计

Linux网络配置管理

 

Linux的网络布局

Linux备份ifcfg-eth0文件造成的网络故障难点

Linux
克隆虚拟机引起的“Device eth0
does not seem to be present, delaying initialization”

Linux
system log avahi-daemon[3733]: Invalid query
packet

[转载]Linux Bond的法则及其不足

Linux Bond
技术学习资料

Linux内核进度研讨

[转载]摸底Linux的历程与线程

[转载]Linux 线程完成机制分析

Linux
关于Transparent
Hugepages的介绍

Linux内核的文件预读readahead

Linux疑难案例

 

-bash:
ulimit: pipe size: cannot modify limit: Invalid
argument

-bash:
.bash_profile: command not
found

 

 

Linux安全监察和控制管理

Linux AVG
ANTIVIRUS FREE使用介绍

记一回Linux服务器上查杀木马经历

 

Linux
Apache配置

Linux系统安装Appach
二.四.陆

Redhat
Server 5.7 安装配备PHP

 

Linux
压缩与解压

 

tar解压难点gzip: stdin: not in gzip
format

Linux
桌面系统学习

Linux系统一检查查查看桌面环境

福睿斯HEL
陆.陆安装桌面环境GNOME

 

Linux
版本介绍学习

 

Red Hat
Enterprise Linux 各类版本以及发布日期

ORACLE
Linux以及 Unbreakable Enterprise
Kernel

 

Linux工具学习计算

 

Nagios研商学习计算

 

Nagios学习实践体系——产品介绍篇

Nagios学习实践种类——基本安装篇

Nagios学习实践类别——配置研商[监督当前服务器]

      
Ignite探讨学习总计

 

Ignite安装配备——上篇

Ignite安装配备——中篇

Ignite
配置更新Oracle JDBC
Drive

Ignite用户配置管理介绍

DPA/Ignite由于DNS难题造成连接不上被监察和控制的数据库服务器

DPA 9.1.85
升级到DPA
10.0.352流程

 

汤姆cat商讨学习总括

Tomcat运转找不到JRE_HOME的缓解办法

Linux
汤姆cat 陆.0装置配备实践计算

      
Symantec
Backup Exec学习总计

 

Symantec
Backup Exec 2010 Agent For Linux安装

Symantec
Backup Exec 2012 Agent For Linux安装

Symantec
Backup Exec 2012 Agent for Linux 卸载

Symantec
Backup Exec Agent For Linux防火墙难题

Symantec
Backup Exec Remote Agent 2010在Redhat Enterprise 6.六上运行难点

Vmware商量学习总计

Vmware虚拟机进入BIOS方法

Perl切磋学习计算

 

Perl
脚本报Can’t locate
Mail/Sender.pm 化解办法

crontab不执行perl脚本分析

 

相关文章