初稿刊载于:20拾-1贰-09
转载至cu于:2012-07-21

初稿刊载于:2010-1二-0九
转载至cu于:2012-07-21

Nginx方今有尾巴爆出,于是把本来的nginx-一.6.二平滑进级至nginx-1.12.壹稳固版。并记下那一经过,参照那1历程也适用其余版本的升官。

Nginx1.捌.0平滑晋级到1.十.一,不间断服务。

闲来无事把nginx服务器升级了,因为尚未平时玩linux,记录下来避防今后再升格的时候又去查资料。

闲来无事把nginx服务器进级了,因为从没平日玩linux,记录下来防止现在再升高的时候又去查资料。

  1. 初阶在此以前先查看一下脚下利用的版本。
  1. 先查看当前的本子及原来安装编写翻译时候的参数路线文件新闻。
    #/usr/local/nginx/sbin/nginx -V
    nginx version: nginx/1.8.0
    built by gcc 4.1.2 20080704 (Red
    Hat 4.1.2-50)
    built with OpenSSL 1.0.1c 10 May 2012
    TLS SNI support enabled
    configure
     arguments: –user=nginx –group=nginx –prefix=/usr/local/nginx 
    –with-http_ssl_module –with-openssl=-1.0.1c 
    –with-pcre=/soft/pcre-8.21 –with-zlib=/soft/zlib-1.2.8 
    –with-http_stub_status_module –with-threads -l_module 
    –with-http_flv_module –with-http_stub_status_module 
    –with-http_gzip_static_module
    –http-client-bodyar/tmp/nginx/client/ 
    –http-proxy-temp-path=/var/tmp/nginx/proxy/ 
    –http-fastcgi-temp-path=/var/tmp/nginx/fcgi/ 
    temp-path=/var/tmp/nginx/uwsgi –http-scgi-temp-path=/var/tmp/nginx/scgi

下载:

下载:

# /usr/local/webserver/nginx/sbin/nginx -V

※那是原先编写翻译的参数。编辑新本子必要用到。

[root@liuawblizfpws~]#wget 
(版本号已修改)

[root@liuawblizfpws~]#wget 
(版本号已修改)

nginx: nginx version: nginx/1.0.5

二.下载新本子:  解压、编译
# tar -zxvf nginx-1.10.1.tar.gz
# cd nginx-1.10.1

./configure –user=nginx –group=nginx –prefix=/usr/local/nginx 
–with-http_ssl_module –with-openssl=/soft/openssl-1.0.1c 
–with-pcre=/soft/pcre-8.21 –with-zlib=/soft/zlib-1.2.8 
–with-http_nginx平滑进级,0不间断平滑进级到一。stub_status_module –with-threads
–with-http_ssl_module 
–with-http_flv_module –with-http_stub_status_module 
–with-http_gzip_static_module 
–http-client-body-temp-path=/var/tmp/nginx/client/ 
–http-proxy-temp-path=/var/tmp/nginx/proxy/ 
–http-fastcgi-temp-path=/var/tmp/nginx/fcgi/ 
–http-uwsgi-temp-path=/var/tmp/nginx/uwsgi 
–http-scgi-temp-path=/var/tmp/nginx/scgi
# make

解压:

解压:

nginx: built by gcc 4.1.2 20080704 (Red Hat 4.1.2-50)

编写翻译安装后能够施行 echo $? 查看是或不是中标,重回值为0表明正确。

[root@liuawblizfpws ~]#tar zxvf  nginx-0.*.*.tar.gz
(版本号已修改)

[root@liuawblizfpws ~]#tar zxvf  nginx-0.*.*.tar.gz
(版本号已修改)

nginx: TLS SNI support disabled

  1. 实践完后,不要 make install,重名 /sbin/nginx为nginx.old
    # mv /usr/local/nginx/sbin/nginx /usr/local/nginx/sbin/nginx.old

  2. 复制编写翻译后 objs 目录下的 nginx 文件到 nginx 的设置目录 sbin 下
    # cp objs/nginx /usr/local/nginx/sbin/

  3. 测试一下新复制过来文件生效意况:
    # /usr/local/nginx/sbin/nginx -t
    nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is
    ok
    nginx: configuration file /usr/local/nginx/conf/nginx.conf test is
    successful

  4. 让 nginx 把 nginx.pid 文件修改成 nginx.pid.oldbin,随即运营nginx,完毕不间断服务。
    # kill -USR2 `cat /usr/local/nginx/logs/nginx.pid`

那边顺便把nginx的本子号修改了,起到自然的平安作用。

那里顺便把nginx的版本号修改了,起到一定的平安效率。

nginx: configure arguments: –user=www –group=www
–prefix=/usr/local/webserver/nginx –with-http_stub_status_module
–with-http_ssl_module –with-http_flv_module –with-cc-opt=-O3
–with-cpu-opt=opteron –with-http_gzip_static_module

那儿查看 nginx 进度,能够见见新确立的进程和原先的进度同时存在.

修改源码文件:

修改源码文件:

※ 注意土红区域,那是从前编译的参数。马上编辑新本子需求用到。

查阅进程pid文件:
[root@Nginx ~]#cd /usr/local/nginx/logs
[root@Nginx logs]# ls
access.log  error.log  nginx.pid  nginx.pid.oldbin

[root@liuawblizfpws ~]#vim nginx-0.*.*/src/core/nginx.h

#define NGINX_VERSION      “*.$.&”   (版本号)

#define NGINX_VER          “net/” NGINX_VECRUISERSION  (服务器名字)

[root@liuawblizfpws ~]#vim nginx-0.*.*/src/core/nginx.h

#define NGINX_VERSION      “*.$.&”   (版本号)

#define NGINX_VER          “net/” NGINX_VELacrosseSION  (服务器名字)

二.下载新本子:

结束 nginx.pid.oldbin:
# kill -QUIT `cat /usr/local/nginx/logs/nginx.pid.oldbin`

重新编译此前要求查阅此前的nginx的安装消息:

再也编写翻译此前要求查阅以前的nginx的安装音讯:

git clone git://github.com/vozlt/nginx-module-vts.git
用于prometheus的监控

得了后翻看 nginx 进度,此时得以见见 nginx
进程是新创造的长河,在此以前的进程已甘休。

[root@liuawblizfpws ~]#/usr/local/nginx/sbin/nginx -V

[root@liuawblizfpws ~]#/usr/local/nginx/sbin/nginx -V

接下来:解压 > 便以前的备选 > 编写翻译

【QUIT 代表管理完当前呼吁后没苏息进度;
  HUP
代表重新加载配置,相当于关闭原有进度,并拉开新的干活进度,不会搁浅用户访问,可以平滑重启
nginx;
  US索罗德一 用于 nginx 日志切换,即重新张开2个日志文件;
  US卡宴2 用于平滑进级可实施程序;
  WINCH 从容关闭职业历程】

收获音讯(路线比量齐观):

获得音信(路线视同一律):

# tar zxvf nginx-1.0.5.tar.gz

  1. 晋级成功,最终在看一下调升后的版本。
    [root@Nginx~]# nginx -tv
    nginx version: nginx/1.10.1
    nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is
    ok
    nginx: configuration file /usr/local/nginx/conf/nginx.conf test is
    successful
     
    [root@Nginx ~]# nginx -V
    nginx version: nginx/1.10.1
    built by gcc 4.1.2 20080704 (Red Hat 4.1.2-50)
    built with OpenSSL 1.0.1c 10 May 2012
    TLS SNI support enabled
    configure
     arguments: –user=nginx –group=nginx –prefix=/usr/local/nginx 
    –with-http_ssl_module –with-openssl=/soft/openssl-1.0.1c 
    –with-pcre=/soft/pcre-8.21 –with-zlib=/soft/zlib-1.2.8 
    –with-http_stub_status_module –with-threads
    –with-http_ssl_module 
    –with-http_flv_module –with-http_stub_status_module 
    –with-http_gzip_static_module 
    –http-client-body-temp-path=/var/tmp/nginx/client/ 
    –http-proxy-temp-path=/var/tmp/nginx/proxy/ 
    –http-fastcgi-temp-path=/var/tmp/nginx/fcgi/ 
    –http-uwsgi-temp-path=/var/tmp/nginx/uwsgi 
    –http-scgi-temp-path=/var/tmp/nginx/scgi
    [root@Nginx ~]#

nginx: configure arguments: –user=www –group=www
–prefix=/usr/local/nginx –with-http_stub_status_module
–with-http_ssl_module

nginx: configure arguments: –user=www –group=www
–prefix=/usr/local/nginx –with-http_stub_status_module
–with-http_ssl_module

# cd nginx-1.0.5

CentOS
七下Nginx服务器的设置配置 
http://www.linuxidc.com/Linux/2017-04/142986.htm

编写翻译,但不设置;在编写翻译目录下的objs目录下的nginx文件便是新的推行文书:

编译,但不设置;在编译目录下的objs目录下的nginx文件就是新的实行文书:

# ./configure 

CentOS上设置Nginx服务器完成虚拟主机和域名重定向 
http://www.linuxidc.com/Linux/2017-04/142642.htm

[root@liuawblizfpws nginx-0.*.*]#./configure –user=www
–group=www –prefix=/usr/local/nginx
–with-http_stub_status_module –with-http_ssl_module

[root@liuawblizfpws nginx-0.*.*]#make

[root@liuawblizfpws nginx-0.*.*]#./configure –user=www
–group=www –prefix=/usr/local/nginx
–with-http_stub_status_module –with-http_ssl_module

[root@liuawblizfpws nginx-0.*.*]#make

–user=www 

CentOS 6.8 安装LNMP环境(Linux+Nginx+MySQL+PHP) 
http://www.linuxidc.com/Linux/2017-04/142880.htm

备份原有nginx文件:

备份原有nginx文件:

–group=www 

Linux下安装PHP情形并配置Nginx辅助php-fpm模块 
http://www.linuxidc.com/Linux/2017-05/144333.htm

[root@liuawblizfpws ~]#mv /usr/local/nginx/sbin/nginx
/usr/local/nginx/sbin/nginx.old

[root@liuawblizfpws ~]#mv /usr/local/nginx/sbin/nginx
/usr/local/nginx/sbin/nginx.old

–prefix=/usr/local/webserver/nginx 

Nginx服务的SSL认证和htpasswd认证 
http://www.linuxidc.com/Linux/2017-04/142478.htm

将已经编写翻译好的nginx文件复制到相应的施行路线下:

将已经编写翻译好的nginx文件复制到相应的推行路线下:

–with-http_stub_status_module 

Linux中安装配备Nginx及参数详解 
http://www.linuxidc.com/Linux/2017-05/143853.htm

cp ~/nginx-0.*.*/objs/nginx /usr/local/nginx/sbin/nginx

cp ~/nginx-0.*.*/objs/nginx /usr/local/nginx/sbin/nginx

–with-http_ssl_module 

Nginx日志过滤 使用ngx_log_if不记录特定日志
http://www.linuxidc.com/Linux/2014-07/104686.htm

测试,防止不可能平滑进级:

测试,以防无法平滑晋级:

–with-http_flv_module 

CentOS 7.二下Nginx+PHP+MySQL+Memcache缓存服务器安装配备 
http://www.linuxidc.com/Linux/2017-03/142168.htm

[root@liuawblizfpws ~]#/usr/local/nginx/sbin/nginx -t

nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax
is ok

nginx: configuration file /usr/local/nginx/conf/nginx.conf test is
successful

[root@liuawblizfpws ~]#/usr/local/nginx/sbin/nginx -t

nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax
is ok

nginx: configuration file /usr/local/nginx/conf/nginx.conf test is
successful

–with-cc-opt=’-O3′ 

CentOS陆.9编写翻译安装Nginx1.4.7 
http://www.linuxidc.com/Linux/2017-06/144473.htm

测试通过则将nginx.pid修改为你nginx.pid.oldbin,同时开动新的nginx:

测试通过则将nginx.pid修改为您nginx.pid.oldbin,同时起步新的nginx:

–with-cpu-opt=opteron 

Nginx
的事无巨细介绍
:请点那里
Nginx
的下载地址
:请点那里

[root@liuawblizfpws ~]#kill -USR2 `cat
/usr/local/nginx/logs/nginx.pid`

[root@liuawblizfpws ~]#kill -USR2 `cat
/usr/local/nginx/logs/nginx.pid`

–with-http_gzip_static_module

正文永世更新链接地址:http://www.linuxidc.com/Linux/2017-07/145396.htm

退出原nginx:

澳门金沙国际,退出原nginx:

# make

澳门金沙国际 1

[root@liuawblizfpws ~]#kill -QUIT `cat
/usr/loca/nginx/logs/nginx.pid.oldbin`

[root@liuawblizfpws ~]#kill -QUIT `cat
/usr/loca/nginx/logs/nginx.pid.oldbin`

  1. 实行完后,那里并非在 make install
    了,接下去重名/sbin/nginx为nginx.old

查验:

查验:

# mv /usr/local/webserver/nginx/sbin/nginx
/usr/local/webserver/nginx/sbin/nginx.old

[root@liuawblizfpws ~]#curl -I netonline.me

HTTP/1.1 200 OK

Server: net/*.$.&

Date: Thu, 09 Dec 2010 05:13:36 GMT

[root@liuawblizfpws ~]#curl -I netonline.me

HTTP/1.1 200 OK

Server: net/*.$.&

Date: Thu, 09 Dec 2010 05:13:36 GMT

  1. 复制编写翻译后objs目录下的nginx文件到nginx的设置目录sbin/下

# cp objs/nginx /usr/local/webserver/nginx/sbin/

  1. 测试一下新复制过来文件生效意况:

# /usr/local/webserver/nginx/sbin/nginx -t

nginx: the configuration file /usr/local/webserver/nginx/conf/nginx.conf
syntax is ok

nginx: configuration file /usr/local/webserver/nginx/conf/nginx.conf
test is successful

陆.
让nginx把nginx.pid文件修改成nginx.pid.oldbin,随即运行nginx,落成不间断

# kill -USR2 `cat /usr/local/webserver/nginx/nginx.pid`  更新配备文件

# kill -QUIT `cat /usr/local/webserver/nginx/nginx.pid.oldbin`
优雅的关门

  1. 晋升成功了,最终在看一下调升后的版本

# /usr/local/webserver/nginx/sbin/nginx -v

nginx: nginx version: nginx/1.12.1

相关文章